Mr. Nola's Glitter Glass-Coat Epoxy

296 reviews




********************Please note*************************

Tips and Pumps are not included at this time due to inventory issues with the vendor.

Looking for that oh so thick and glossy topcoat that adorns the surface of your favorite trend worthy tumblers?  Need that look yourself, then you have found your secret weapon.  It’s totally doable with Mr. Nola’s Glitter Glass-Coat Epoxy.

We have worked diligently with our manufacturer Marabu, who have gone above and beyond, industry standards to formulate and certify our epoxy for use in your home and craft rooms.   

Mr. Nola's Glass-Coat Epoxy is ASTM D-4236 Certified*. 

Mr. Nola’s Glitter Glass-Coat Epoxy

Mr. Nola’s Glitter is proud to introduce our easy to use, low odor, professional-grade epoxy.  As a “Maker” it was important to Mrs. Nola to ensure that Mr. Nola’s Glitter Glass-Coat Epoxy was formulated to be the best epoxy for all types of tumblers.  We knew that curating our very own epoxy was the only way to help ensure every color, glitter, and detail on your beautiful tumbler is showcased to its’ full potential.  Since longevity of a custom tumbler is always a concern, we got you covered!  Mr. Nola’s Glitter Glass-Coat Epoxy was engineered with UV inhibitors to prevent yellowing and provide long-term clarity and best of all it cures to a tough durable scratch resistant finish.  Mr. Nola’s Glitter Glass-Coat Epoxy is dry to the touch in 6 hours and makes it perfect for projects that require more time to be creative.

Mr. Nola’s Glitter Glass-Coat Epoxy is great for layers and can be used as a final coat for your tumblers to protect and enhance decals, glitter, Marabu Easy Marble®, alcohol inks, geodes, wood grains, and more! 

  • FDA compliant Resin
  • Conforms to ASTM D-4236
  • Dry in 6 hours
  • Full Cure in 72 hours
  • Work Time 30-45 minutes
  • Ultra Clear 
  • Self-Leveling
  • Medium Viscosity
  • Tough Protective Coating
  • Waterproof
  • Sandable
  • Ideal For Layering
  • UV-Resistant
  • Low Odor
  • VOC Free
  • Heat Rated to 500 Degrees 



Mix ratio is 1:1. Mix one Part A (resin) to one Part B (hardener). Pour equal amounts of Part A and Part B into a flat-bottomed mixing container. Mix gently, stirring in one direction, while scraping bottom and sides of mixing container to ensure a complete mixture. Mix for 1-2 minutes or until mixture is clear. Pour immediately on your tumbler. Recommended working temperature should be above 73°F, and less than 60% humidity.

Due to the longer work-time, the mixture may be used for use with silicone molds in applications. 

Uncured resin cleans easily with acetone.


Pint set includes one 8oz bottle of Part A and one 8oz bottle of Part B= 16oz of Mixed Product 

Quart set includes one 16oz bottle of Part A and one 16oz bottle of Part B= 32oz of Mixed Product 

Half-Gallon set includes one 32oz bottle of Part A and one 32oz bottle of Part B= 64oz of Mixed Product 

One-Gallon set includes one 64oz bottle of Part A and one 64oz bottle of Part B= 120oz of Mixed Product 

*ASTM D-4236


The American Society for Testing and Materials sets worldwide standards that help to improve performance and instill confidence in the safety of products around the world.  ASTM D-4236 is specifically a federally regulated standard for the labeling of art materials for chronic health hazards.  Any art material that is intended for home use, must be evaluated by a board-certified toxicologist for any potential threats the material may pose.  If a product contains any material that is known to be dangerous in any way, the product must bear appropriate warnings.  

After being evaluated, Mr. Nola’s Glitter Speed- Dry Epoxy and Mr. Nola’s Glitter Glass-Coat Epoxy, was found to conform to ASTM D-4236 when used as directed.  This is great news for our customers, now pass a good time and get Creative!


Please make sure that you protect yourself against inherent threats and make that switch to a product that has been extensively evaluated and tested like ours

Estimate shipping

Customer Reviews
5.0 Based on 296 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Taria M.
United States

Love this epoxy!

Love the smooth, glass-like shine! Easy to use, low odor, perfect work time!

Donna B.
United States United States

Best Epoxy ever!

I never use anything else. It’s awesome. No smell, no bubbles and self leveling. Dries crystal clear and mirror smooth shiny. You won’t regret buying it!

Heather W.
United States United States

Mr. Nola's Glass Coat

I am pretty new to tumbler making and have tried out about 4-5 different epoxy brands trying to find one I like. I will no longer be looking. This is the best one! It looks like glass on my tumblers! Very clear no issues with bubbles. Easy to mix and to work with. Also, I barely had to sand the first coat at all. It leveled beautifully! I am so glad to have found this epoxy and will be a repeat customer!

Luketia W.
United States United States

Glass Coat

I absolutely love it..I dont use anything else

Tammy B.
United States United States

Mr. Nola's Glass Coat

This product is amazing! It has a lot less bubbles and it levels out so well! The work time is great too..I don't feel so rushed! I will only use this epoxy from now on!

You may also like

Recently viewed