Mr. Nola’s Glitter Deep-Pour Epoxy Resin



For Decorative Castings & River Tables

Bring your casting ideas to life with DEEP-POUR.  Easy-to-use, low odor, self-leveling, bubble resistant epoxy resin, with a tough, durable finish specially formulated for resin artists.  Ideal for deep molds and applications 4” and more.  Engineered with UV inhibitors to slow natural yellowing and provide long-term clarity.  Touch dry in 48 hours.  Full cure time 5-7 days.  Permanent and waterproof once fully cured.  Resin (Part A) is FDA compliant resin.  Scratch resistant.  Can be used with Marabu alcohol inks, glitter, pigments, and other colorants.  Ultra-clear, sandable, heat tolerant, thin viscosity, VOC free resin.  Conforms to ASTM D-4236.  Work time 3-6 hours.  Uncured resin cleans up with acetone.



Mixing Ratio: 2:1 

Viscosity: Medium 

Finish: Glass-like, crystal clear, scratch-resistant finish 

UV Resistant: UV-resistant formula protects against yellowing 

Heat Resistant: 500°

Odor: Zero VOC, low odor 

Application Temperature: 70-85°

Working Time: 3-6 hours @ 77°

Tack-free Time: 48 hours @ 77°

Time to Sand: 72 hours @ 77°

Fully Cured (days): 5-7 days 


Available Sizes: 

48 oz. Kit = 32 oz. A + 16 oz. B 

1.5 gal. Kit = 1 gal. A + 64 oz. B 


Mixing Instructions: 

Mix ratio is 2:1.  Mix two Parts A (resin) to one Part B (hardener).  Mix gently while scraping bottom and sides of mixing container for 5 minutes or until clear.  Transfer into a new mixing container and mix for an additional 1-2 minutes.  Pour into desired mold.  Cure time is mass and temperature dependent.  Recommended working temperature should be above 73°F and less than 60% humidity.

Estimate shipping

You may also like

Recently viewed